QG2500 QUINTON HAZELL Комплект пыльника, рулевое управление
Продавец
Remzona.by
Код товара: A.1861054
Продавец
Remzona.by
Призер Премии
«Номер Один»
Призер Премии
«Народная Марка»
Duraboot
universal gaiter kit
Fitting Instruction
1 Remove the road wheel and hub. Slacken and remove the
track rod end retaining nut. Cut off the old boot, don't
pull
over the track rod end.
2 Pull the swivel pin towards you and place cone cover
over the pin.
3 Lubricater the fitting cone and the inside of the new
boot with cone spray.
4 Pull larger opening of boot over the cone first and then
ease the small opening over the cone and into position.
5 Remove the cone and top up the steering reck with
correct lubricant (EP90 or similar>) via the small
opening.
6 Secure one end of the boot with the fixing clip.
7 Secure the other end with the remaining fixing clip.
8 Refit the track rod end oto the control arm and tight
en nut to the correct torque. Replace the road wheel.
universal gaiter kit
Fitting Instruction
1 Remove the road wheel and hub. Slacken and remove the
track rod end retaining nut. Cut off the old boot, don't
pull
over the track rod end.
2 Pull the swivel pin towards you and place cone cover
over the pin.
3 Lubricater the fitting cone and the inside of the new
boot with cone spray.
4 Pull larger opening of boot over the cone first and then
ease the small opening over the cone and into position.
5 Remove the cone and top up the steering reck with
correct lubricant (EP90 or similar>) via the small
opening.
6 Secure one end of the boot with the fixing clip.
7 Secure the other end with the remaining fixing clip.
8 Refit the track rod end oto the control arm and tight
en nut to the correct torque. Replace the road wheel.
universal gaiter kit
Fitting Instruction
1 Remove the road wheel and hub. Slacken and remove the
track rod end retaining nut. Cut off the old boot, don't
pull
over the track rod end.
2 Pull the swivel pin towards you and place cone cover
over the pin.
3 Lubricater the fitting cone and the inside of the new
boot with cone spray.
4 Pull larger opening of boot over the cone first and then
ease the small opening over the cone and into position.
5 Remove the cone and top up the steering reck with
correct lubricant (EP90 or similar>) via the small
opening.
6 Secure one end of the boot with the fixing clip.
7 Secure the other end with the remaining fixing clip.
8 Refit the track rod end oto the control arm and tight
en nut to the correct torque. Replace the road wheel.
Название: QUINTON HAZELL, QH Autoparts Limited
Quinton Hazell (сокр. QH) – довольно крупный британски производитель и упаковщик автомобильных запчастей. Продукция этого бренда довольно распространена в странах Центральной Европы. Заводы компании расположены в 5 европейских странах.
Производитель имеет широкий ассортимент товаров: элементы сцепления, системы охлаждения, комплектующие тормоза и рулевых механизмов, отдельные элементы подвески и топливной системы. Занимает нишу в среднем диапазоне цена/качество. На территории постсоветского пространства практически не представлен.
Страна-производитель: Великобритания